New Cricut Maker 3

I decided it was high time to step into the tech world with my miniatures. My attempts at making an arched ceiling beam for my vaulted ceilings from basswood sheets for the Chateau haven't been going well. My dear husband stepped in and made a much better version using basswood strips and a pre-shaped arch I found. These took him hours and are much more uniform than my attempts. I sanded and painted them...and was getting ready to install in my kitchen. 

Not too fast...the wallpaper in the kitchen just wasn't cutting it, and the flooring lacked umph. I found some fabulous tile paper from Les Chinoiserie that was originally for a bathroom and it was calling me to use it in the kitchen. So I got that applied to a base and then found another Les Chinoiserie paper for the walls...and I'm in love! 

Now to get back to the arches, well it hit me...Cricut can cut thin basswood. We had actually thought about it a few months ago when hubby was doing the 2nd version using basswood strips. Bit the bullet and got it last week. We spent the week on and off, he did the SVG, and then I did some test projects learning Design Space and using the Cricut to cut them. We did a trial on paper, then on cardstock veneer, and then finally on the 1/16" basswood. I'm doing the happy dance!

Here's the floor, wallpaper, and the old arch beam - while I consider the choices...before:

Now the paper is installed, and the flooring laid (I'm really grooving on it!)

First test of the basswood. 

This is when I realize the bottom horizontal is all the way across, unlike the original design. Still....I love it! This is only 1 thickness, and the idea is I will glue 3 of the 1/16" pieces together. 

Final version - and I'm now printing 3 on a 24" sheet. Just ordered more wood. I also decided that I will do the same arches in the other wing - the conservatory. 

Chateau Foyer gets new look

The Foyer wallpaper I chose originally - I had my heart set on the panel effect and spent a lot of time (and $) in finding the right paper, and then cutting the pattern to a narrower repeat (because the room was not all that large). I was pretty happy with it...but it had seams that were more obvious than I liked. And the outside coach lights stopped working, not even bulb replacements would fix that. 

So I bit the bullet and got more coach lights and found a fabulous deep elegant wallpaper from Les Chinoiseries. The crown molding in that room was different than the LR and DR, since I didn't have enough of that molding. But I really wasn't happy with the one I ended up using. So, it all came out. The new coach lights went up, and I wired them to the subfloor instead of the wall. This way, if the connection goes wonky, I can lift the floor and re-attach the eyelets. 

The wallpaper went up like a charm, and it dramatically changed the mood...its so rich and elegant. As I was installing it, the idea of using a dark/wood look in a crown started to form. I had purchased some Unique Miniatures crown molding I had used once before in another house. For some reason, once upon a time, I kept a small cutting of that molding and had apparently applied a stain/paint wash to it. I stumbled upon it in my stash, and it was just staring me in the face!

Before:

Visualizing new paper

Paper up, and old crown sample I found that I had previously stained/washed - looks rich!

Completed paper

Staining the crown

And final effect!